Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Deragliatore Anteriore Shimano Dura Ace R9250 Di2
Deragliatore Anteriore Shimano Dura Ace R9250 Di2
1/3
Prezzo consigliato 482,96
372,05
110,91 di sconto
In magazzino
(ancora 4)
- Consegna 2-4 giorni lavorativi
- Consegna monitorata gratuita
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiMigliore Offerta
Migliore Offerta
Approfitta dei prodotti più richiesti a prezzi competitivi. Che tu stia cercando degli pneumatici, una nuova catena o altri accessori, le nostre Migliori Offerte ti permetteranno di acquistare i prodotti migliori a prezzi competitivi.
Pro e Contro
Pro e Contro
- Great shifting performance in terms of speed and shifting under load.
- Semi-wireless so no cable between shifter and front derailleur. Easy installation and no chance of cable breakage.
- The shifting speed of the front derailleur has increased by 45% compared to its predecessor.
- More aerodynamic; frontal area has been reduced by 33%.
Caratteristiche tecniche
Caratteristiche tecniche
|
Marca
|
Shimano |
| 12- velocità | |
| Elettronico | |
|
Supporto
|
Saldatura |
|
Peso
|
96 grammi |
|
Colore
|
Nero |
|
Quale gruppo possiedi?
|
Shimano Dura-Ace |
Descrizione
Descrizione
The Shimano Dura Ace R9250 front derailleur is part of the Shimano R9200 Di2 group set. The shifting speed of the front derailleur has increased by 45% compared to the Shimano Dura Ace R9150 derailleurs. The Shimano Dura Ace Di2 R9250 front derailleur therefore shifts much faster and more efficiently than a fully wireless groupset.
The shifting speed under load is also very impressive. The Shimano Dura Ace R9250 front derailleur is more compact and lighter. The frontal area has been reduced by 33%, is 96 grams lighter and is suitable for chainrings from 50T to 54T.
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
Mostra di più
Mostra di meno
The shifting speed under load is also very impressive. The Shimano Dura Ace R9250 front derailleur is more compact and lighter. The frontal area has been reduced by 33%, is 96 grams lighter and is suitable for chainrings from 50T to 54T.
Require a derailleur clamp?
Some bicycles do not have a braze on for the front derailleur. To mount this front derailleur, you can use a derailleur clamp.Compatibilità
Please note! Can only be used in combination with Shimano Dura Ace R9200 and Ultegra R8100 12 speed groupset parts.Montaggio
Position the front derailleurWhen installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
Spesso acquistati insieme
Spesso acquistati insieme
Deragliatore Anteriore Shimano Dura Ace R9250 Di2
Migliore Offerta
Approfitta dei prodotti più richiesti a prezzi competitivi. Che tu stia cercando degli pneumatici, una nuova catena o altri accessori, le nostre Migliori Offerte ti permetteranno di acquistare i prodotti migliori a prezzi competitivi.
Deragliatore Anteriore Shimano Dura Ace R9250 Di2
Descrizione
The Shimano Dura Ace R9250 front derailleur is part of the Shimano R9200 Di2 group set. The shifting speed of the front derailleur has increased by 45% compared to the Shimano Dura Ace R9150 derailleurs. The Shimano Dura Ace Di2 R9250 front derailleur therefore shifts much faster and more efficiently than a fully wireless groupset.The shifting speed under load is also very impressive. The Shimano Dura Ace R9250 front derailleur is more compact and lighter. The frontal area has been reduced by 33%, is 96 grams lighter and is suitable for chainrings from 50T to 54T.
Require a derailleur clamp?
Some bicycles do not have a braze on for the front derailleur. To mount this front derailleur, you can use a derailleur clamp.Compatibilità
Please note! Can only be used in combination with Shimano Dura Ace R9200 and Ultegra R8100 12 speed groupset parts.Montaggio
Position the front derailleurWhen installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.